Independent maintenance, repair and parts for Nordex and Acciona platforms across Australia, in and out of OEM warranty.
Request a QuoteMatched to vetted providers in your state. No cost, no obligation.
The Nordex Group now covers both the Nordex platforms and the former Acciona Windpower range, which merged into the group. Based on public information, these machines appear on several Victorian and New South Wales projects, spanning the Gamma and Delta generations through to the current Delta4000 series. That breadth means owners need service partners fluent in geared drivetrains, modern converters and, on some units, concrete or hybrid tower construction.
Tell us the model, site and scope once. We match your enquiry to providers with real Nordex Group experience and the right spares access.
Need advice?Tell us your Nordex or Acciona model, site and the work required. We match you to independent providers with Nordex Group experience.
Your enquiry is sent to vetted service partners who may contact you directly. We never charge owners or asset managers.
Global Wind Organisation trained crews across the network.
Partners aligned with CEC codes of conduct.
Out-of-warranty support for major OEM platforms.
HV tickets, rope access (IRATA) and heavy-lift credentials.
The Nordex Group brings together the Nordex and Acciona Windpower ranges, and based on public information both appear across several Victorian and New South Wales projects.
Acciona Windpower merged into the Nordex Group, so a single service and parts structure now sits behind two brand histories. Indicative Australian deployments draw on platforms from the Gamma and Delta generations through to the current Delta4000 machines, alongside Acciona AW-series units in the 3 MW class. We keep site examples general and clearly hedged: these pairings are based on public information and are not confirmed. As fleets pass their warranty terms, demand for independent maintenance, repair and drivetrain work keeps rising.
The Nordex N90, N100, N117 and N131 machines cover the mid-capacity geared range, while the Delta4000 series (N149, N155 and N163) lifts rated output into the 4 MW to 6 MW class on larger rotors. The Acciona AW125 and AW132 sit in the 3 MW class. One point sets some Acciona platforms apart: they use concrete or hybrid steel-concrete towers, which change the inspection and monitoring picture compared with an all-steel tubular tower. All of these are onshore platforms.
Across these platforms, the faults we see most often are gearbox and intermediate bearing wear, generator and converter faults, pitch and yaw system problems (hydraulic and electric pitch, yaw gear and brake wear), main bearing wear, and blade leading-edge erosion. On Acciona units with concrete or hybrid towers, inspection also takes in the tower sections, joints and post-tensioning rather than steel-shell checks alone. Where repeated repairs no longer stack up, a planned main component exchange can be the more economic path.
When a Nordex or Acciona site leaves its warranty or OEM service term, owners weigh three paths: a Nordex service agreement, an independent service provider, or self-perform with contracted specialist support. Each has trade-offs in cost, spares access and response time, and the concrete-tower platforms add a further specialist dimension. We match your enquiry to providers across all three models so you can compare on your terms. See our service contracts page for how the models differ.
Nordex Group spares come through the OEM channel, independent suppliers and refurbished-component specialists. Pairing a drone or rope-access inspection with a parts plan keeps unplanned downtime low, and on hybrid-tower units it folds tower condition into the same visit. We cover Nordex and Acciona fleets in Victoria, New South Wales, South Australia and every other state.